Expert North Brunswick Plumber Shares How to Fix a Running Toilet

Everything may seem perfect with your newly remodeled bathroom. Fancy fixtures, shiny tiles and exquisite interior decoration — but, this does not exclude the occurrence of emergency plumbing situations. Even after your bathroom remodeling service, you may run into a leaking tap if fixtures are of poor quality. You may also encounter a running toilet.

Not everyone knows how to fix a running toilet, so hiring the services of an expert local plumber is the fastest and best method of solving the problem. But, before you buy a new toilet set or spend money when not really needed, read these tips hat may help:

A number of toilet dilemmas can be fixed easily by carrying out some minor tweaks and adjustments. You just have to know what to do and how to do it. But before doing so, it is best to figure out the cause of all these before carrying on any solution.

Causes Of A Running Toilet

Stuck Flapper

If a toilet tank does not fill to capacity or does not fill up at all, then this could be an indication of a malfunctioning flapper. A stuck flapper can be a result of many factors which include:

The chain not properly catching
The wedge of the flapper not properly opening
The flapper not aligned properly
The flapper is stuck
Intermittent Filling

If the toilet tank is not performing its duties of tank filling, then there may be a slow leak. In order to confirm this, place a few tablets of food dye in the tank. Do not flush the toilet for at least an hour; if the colored dye shows up in the bowl after the hour has past, this confirms the problem.

A Dysfunctional Flapper

A flapper that is dysfunctional can result in multiple running toilet issues. Hiring the services of a plumber to repair this, particularly when it requires replacement, can frequently cost a lot.

Use the repair methods below to address your running toilet problems.

Repairing A Running Toilet

Stuck Flapper

In order to fix this toilet malfunction, simply grab the flapper and securely close it in your hand. Carry out any required adjustments and it should respond well to this approach.

Intermittent Filling

The solution for intermittent filling differs based on its root cause; however, the most general method of correcting this is by removing the buildup of mineral and cleaning the tank. You can also simply replace the flapper to directly fix the problem.

A Dysfunctional Flapper

Close the valve of the toilet which is frequently located underneath the toilet tank. Flush the toilet to verify that it is closed. If the tank refuses to fill up, then this proves that the valve has been successfully closed.

Remove the flapper and the chain and replace it with a new one. Use a finger to remove any mineral you find around the rim of the flapper. Remember to make use of a sponge while replacing the flapper.

Remember that the key bathroom care and maintenance is to buy quality fixtures, preventive care and maintenance.

Categories: Home Improvement